Extron DTP T HD2 4K 230 handleiding
Handleiding
Je bekijkt pagina 21 van 23
Extron DTP T HD2 4K 230/330 • SIS Commands 16
Command ASCII Command
(host to unit)
Response
(unit to host)
Additional Description
HDCP Output Mode
Set HDCP output mode
for a single output
ESX!*X1!HDCP} HdcpSX!*X1!] X1! = 0-3 (0 is default)
Set HDCP output mode
for all outputs
ESX1!HDCP} HdcpSX1!] X1! = 0-3 (0 is default)
Query HDCP output mode
for all outputs
ESHDCP} X1!•X1!]
HdcpSX1!•X1!]
Video bit depth of outputs 1-2
Verbose Mode 2/3
Signal Status (unsolicited)
Request all signal status
ELS} X@*X@•X@]
SigX@*X@•X@]
Input * Outputs 1-2
Verbose Mode 2/3
Request all HDCP status
EHDCP} X@*X@•X@]
HdcpX@*X@•X@]
Input * Outputs 1-2
Verbose Mode 2/3
HDCP Authorized Device
HDCP authorization
enable/disable
EEX@HDCP} HdcpEX@] X@ = 0 (disabled), 1 (enabled, default)
Query HDCP authorization
status
EEHDCP}
X@]
HdcpX@]
X@ = 0 (disabled), 1 (enabled, default)
Verbose Mode 2/3
NOTES:
X! = Output selection
X@ = Output status
X1! = HDCP output mode
1
through max number of outputs
0
=
disabled/off/undetected (default)
, 1
=
(enabled/on/detected)
0 = Encrypt as required by input
(Continuous trials for HDMI sinks, attempt for 10 seconds on DVI
sinks, then fail)
1 = Always encrypt
(Continuous trials for HDMI sinks, attempt for 10 seconds on DVI
sinks, then fail)
2 = Encrypt as required by input
(Continuous trials for HDMI sinks and DVI sinks)
3 = Always encrypt
(Continuous trials for HDMI sinks and DVI sinks)
Bekijk gratis de handleiding van Extron DTP T HD2 4K 230, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | DTP T HD2 4K 230 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3665 MB |
