EXSYS EX-45034IS handleiding
Handleiding
Je bekijkt pagina 19 van 20
19
EX-45034IS English
© Copyright 2020 by EXSYS Vertriebs GmbH. All Rights Reserved
6. Driver Installation
Windows
Second, please install now the USB to serial driver. Open the folder „USB_to_IO/FTDI“. Please
select the folder with your operating system and install the driver (see Picture). Follow the
hardware assistant and finish the installation. Important! Restart your PC in any case after
installing the drivers.
Use the following driver for the following Windows Server Version:
Windows Server 2003 = XP Driver
Windows Server 2008 = VISTA Driver
Windows Server 2008R2 = Windows 7 Driver
Windows Server 2012 = Windows 8.x Driver
Windows Server 2012R2 = Windows 10 Driver
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at „Ports (COM & LPT)“ and at „USB-
Controller“ the following new entry's:
If you see this or a similar information the device is installed correctly.
CHANGE PORT NUMBER
If you like to change the port number for example COM3 to COM5, open the „Device Manager” click
at „COM3”, „Settings” and then „Advance”. There you can change between COM3 till COM256.
Bekijk gratis de handleiding van EXSYS EX-45034IS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EXSYS |
| Model | EX-45034IS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1961 MB |
Caratteristiche Prodotto
| Kleur van het product | Grijs |
| Gewicht | 200 g |
| Breedte | 100 mm |
| Diepte | 70 mm |
| Gebruikershandleiding | Ja |
