EXSYS EX-45032IS handleiding
Handleiding
Je bekijkt pagina 14 van 20
14
English EX-45032IS
© Copyright 2020 by EXSYS Vertriebs GmbH. All Rights Reserved
4. Switch Settings
There are two 8-pin DIP-switches on the backside of the board at the EX-45032IS. For each port
there is a separate DIP-switch. The 8-pin DIP-switches are for the modes (RS-232, RS-422, RS-
485 2-wire or RS-485 4-wire) and for the signal termination for RX+, RX-, TX+ and TX- (see picture
on page 15). The settings can be set individually for each serial port. The DIP-switch are
responsible for the port 1 (S1) and the second DIP-switch are responsible for the port 2 (S2). The
following images on page 15, 16 and 17 you can see the setting of the mode switch and terminator
switch. Additionally the setting of the mode switch are printed on the back of the board.
3.2 Connections
3. Layout and Connections
DB9 (EX-45032IS) DB9 (Device)
1 DATA- 1 DATA-
2 DATA+ 2 DATA+
3 GND 3 GND
Bekijk gratis de handleiding van EXSYS EX-45032IS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EXSYS |
| Model | EX-45032IS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1859 MB |
Caratteristiche Prodotto
| Kleur van het product | Oranje |
| Gebruikershandleiding | Ja |
| Soort serieële aansluiting | RS-485, RS-422, RS-232 |
| Aantal per verpakking | 1 stuk(s) |
| Intern | Ja |
