EXSYS EX-44316-2 handleiding
Handleiding
Je bekijkt pagina 9 van 16
9
EX-44316-2 English
The EX-44316-2 is a plug & play high-speed serial RS-232 expansion card for the PCI-
Express Bus. The EX-44316-2 provides sixteen 9 pin high speed RS-232 serial ports. It
uses data transfer rates up to 921Kbaud/s. The EX-44316-2 design utilizes the System-
Base chipset with 256-byte buffer, which incorporates the latest in high speed interface
technology. In combination with the fast PCI-Express bus it provides a secure and very
high data transfer on each port. It supports all PCI-Express slots x1 to x16. It is not pos-
sible to change the address or IRQ settings manually, they will be obtained automatical-
ly by the system BIOS and operating system. With the jumpers you can enable power
to pin 9. Please note if you use power to pin 9 your peripheral device must support it.
Furthermore, you can use another jumper to set the voltage of +5V or +3,3V on the
UART. There is additionally a 8 cm low profile slot bracket for installation in small com-
puter housing.
Features:
• Compatible for PCI-Express p9-x1 to x16
• Up to 921.6 Kbps Baud Rate
• Support RS-232
• Support Windows NT 4.0/ 9x/ 2000/ XP/ Vista/ 7/ 8.x/ 10/ Server 20xx/ Linux
• Certificate for
Before you install the EX-44316-2 in your PC, please check at first the contents of the
delivery:
• EX-44316-2
• Driver CD
• Manual
• 2x Octopus Cable
• 32x Nuts
• Low Profile Bracket
1. Description
2. Extent of Delivery
© Copyright 2020 by EXSYS Vertriebs GmbH. All Rights Reserved
Bekijk gratis de handleiding van EXSYS EX-44316-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EXSYS |
| Model | EX-44316-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1670 MB |
