EXSYS EX-1309-T handleiding
Handleiding
Je bekijkt pagina 19 van 24
19
EX-1309-T English
5. Hardware Installation
Because there are large differences between PC’s, we can give you only a general instal-
lation guide for the EX-1309-T. Please refer your computers reference manual whenever
in doubt.
1. At first connect the USB cable (A-Plug) to the USB A-Port at your PC.
2. Now you can set the Dipp-Switch to the desired settings. (see picture Dipp-Switch
Settings)
3. Now you can start your PC and continue with the point Driver Installation.
Windows 9.x/ ME/ 2000/ XP/ Vista/ 7/ 8.x/ 10/ Server 20xx
Windows will recognize a new „FT232R USB UART“ and open the hardware assistant.
Please choose manual installation and put the driver CD into your CD-ROM drive. Do
not start the automatically search for the driver. Please select the correctly driver in the
FTDI folder for your operating system (see picture).
CHECK INSTALLED DRIVER
Open the >Device Manager<. Under ”Ports (COM and LPT)“ you should find four
new „USB Serial Port (COM3)“ entry and also you will find under „Universeller Seri-
eller Bus Controller“ a new „USB Serial Converter“. If you see this or similar entries
the module is installed correctly.
CHANGE PORT NUMBER (NOT WIN98 & ME)
If you like to change the port number for example COM3 to COM10, open the >Device
Manager< click at >COM3<, >Settings< and then >Advance<. There you can choose
between COM3 up to COM256.
6. Driver Installation
Bekijk gratis de handleiding van EXSYS EX-1309-T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EXSYS |
| Model | EX-1309-T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1767 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 160 g |
| Snoerlengte | 1.8 m |
| Compatibele besturingssystemen | Win98SE/ ME/ XP/ 200x/ Vista/ 7/ 8.x/ 10 (32&64) WinCE/ Server 2012R2/ Linux/ Mac OS 10.x |
| Aansluiting 1 | USB 2.0 |
