Exquisit WA8014-340-A handleiding
Handleiding
Je bekijkt pagina 34 van 52
Setting up and connecting
Page | 34
Location of the unit
1. Place the appliance on a horizontal, solid floor.
2. The appliance must be aligned horizontally.
Placing the appliance on an unsuitable floor
could cause strong vibrations, considerable noise
and a malfunction.
3. Leave sufficient free space:
à -right and left 2 cm
à -rear 10 cm
Ø The appliance must not wobble.
Ø All adjustable feet must have firm contact with the floor.
Ø Do not place pieces of wood or similar underneath.
11.1 Align the appliance
It is important to align the appliance, otherwise it will vibrate during
spinning and the bearings may wear out prematurely. If the floor is
slightly uneven, level the appliance with the front feet.
Adjust the feet so that the appliance is balanced and stable on the
floor.
1. Loosen the lock nut (A) of the first stand with the supplied
assembly spanner.
2. Height adjustment
3. Check the horizontal position.
4. Adjust the second stand (B).
5. Tighten the lock nuts (A) with the assembly spanner.
11.2 Water inlet and outlet
Connect the water inlet hose to the back of the appliance.
Water inlet: Cold water only
Faucet: ¾" hose screw connection
There are two seals in the connections of both pipe ends to prevent
water from escaping.
Connection diagram - cold water connection
The connection to the water tap is made with the hose supplied by
the manufacturer. Connect the bent end to the back of the unit
and the straight part to the water tap.
Bekijk gratis de handleiding van Exquisit WA8014-340-A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Exquisit |
| Model | WA8014-340-A |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6958 MB |
