Handleiding
Je bekijkt pagina 33 van 52
Setting up and connecting
Page 33 of 52
What to do if the refrigeration circuit is damaged:
ü Avoid naked flames and ignition sources.
ü Ventilate the room in which the appliance is installed thoroughly.
ü Contact After Sales Service.
10 Setting up and connecting
Before setting up and connecting the appliance, ensure that
• the appliance is disconnected from the mains power supply (see chapter 9.4) and
• the installation conditions are fulfilled (see chapter 10.2).
Unpacking the appliance
The packaging materials must be undamaged. Inspect the appliance for transport
damage. On no account should a damaged appliance be connected to the mains power
supply. In case of damage, contact the supplier.
CAUTION
RISK OF INJURY AND APPLIANCE DAMAGE!
• Always carry out transport with a second person.
• Do not cut packaging material with a sharp object, e.g. carpet knife.
Removing transport protection
The appliance and some of the interior parts are secured for transport.
ü Remove all adhesive tape on the right and left side of the appliance door.
ü Remove all adhesive tapes and packaging parts from the interior of the appliance.
ü Remove residues of adhesive with alkaline water.
There may be stickers with warnings on the appliance. These must be observed and not
removed from the appliance.
10.1 Door dismantling
The appliance offers the option of dismantling the door to facilitate transport.
ATTENTION
APPLIANCE DAMAGE!
Do not tilt the appliance more than 45° when dismantling the door to avoid damaging the
cooling system.
Tools required for door removal:
DESIGNATION
TOOL
Cross-head screwdriver
Flat screwdriver
Bekijk gratis de handleiding van Exquisit SBS46-040D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Exquisit |
| Model | SBS46-040D |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 5935 MB |
