Handleiding
Je bekijkt pagina 26 van 40
Setting up and connecting
Page 26 of 40
What to do if the refrigeration circuit is damaged:
• Avoid naked flames and ignition sources.
• Ventilate the room in which the appliance is installed thoroughly.
• Contact After Sales Service.
10 Setting up and connecting
Before setting up and connecting the appliance, ensure that
• the appliance is disconnected from the mains power supply (see chapter 1.4) and
• the installation conditions are fulfilled (see chapter 2.1).
Unpacking the appliance
The packaging materials must be undamaged. Inspect the appliance for transport
damage. On no account should a damaged appliance be connected to the mains power
supply. In case of damage, contact the supplier.
CAUTION
RISK OF INJURY AND APPLIANCE DAMAGE!
• Always carry out transport with a second person.
• Do not cut packaging material with a sharp object, e.g. carpet knife.
Removing transport protection
The appliance and some of the interior parts are secured for transport.
ü Remove all adhesive tape on the right and left side of the appliance door.
ü Remove all adhesive tapes and packaging parts from the interior of the appliance.
ü Remove residues of adhesive with alkaline water.
There may be stickers with warnings on the appliance. These must be observed and not
removed from the appliance.
10.1 Setting up the appliance
Place the appliance in accordance with the prescribed minimum clearances.
Set up the appliance in a dry, well-ventilated room whose ambient temperature
corresponds to the climate class for which the appliance is designed.
ATTENTION
APPLIANCE DAMAGE!
Leave the appliance to stand for 12 hours after transport to allow the refrigerant to
collect in the compressor. Failure to observe this may damage the compressor and cause
the appliance to fail. This would void all warranty claims.
CLIMATE CLASS
TEMPERATURE RANGE
(SN) Extended temperature range
+10 °C to +32 °C
(N) Temperature range
+16 °C to +32 °C
(ST) Subtropical temperature range
+16 °C to +38 °C
(T) Tropical temperature range
+16 °C to +43 °C
Bekijk gratis de handleiding van Exquisit GT101-E-040E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Exquisit |
| Model | GT101-E-040E |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 3873 MB |
