Handleiding
Je bekijkt pagina 29 van 40
Setting up and connecting
Page 29 of 40
13. Insert the pin of the hinge at the top into the hole of
appliance door.
14. Screw the hinge tight.
15. Align appliance door horizontally and vertically. Make sure
that the seals close well.
16. Readjust the hinges if necessary.
17. Fit the hinge cover and cover cap.
18. Remove the appliance door seal.
19. Turn the appliance door seal 180° clockwise.
20. Refit the appliance door seal.
ATTENTION
APPLIANCE DAMAGE!
To avoid appliance damage, observe the following:
• Stand the appliance upright again after swapping the hinges.
• Check the exact fit of the door seal and the appliance door.
• Reconnect to the mains power supply after three hours at the earliest.
Door handle assembly
10.2 Setting up the appliance
Place the appliance in accordance with the prescribed minimum clearances.
Set up the appliance in a dry, well-ventilated room whose ambient temperature
corresponds to the climate class for which the appliance is designed.
ATTENTION
APPLIANCE DAMAGE!
Leave the appliance to stand for 12 hours after transport to allow the refrigerant to
collect in the compressor. Failure to observe this may damage the compressor and cause
the appliance to fail. This would void all warranty claims.
Bekijk gratis de handleiding van Exquisit GS5271-NF-H-040D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Exquisit |
| Model | GS5271-NF-H-040D |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 4669 MB |
