Handleiding
Je bekijkt pagina 27 van 37
Putting into operation
Seite 27 von 37
11 Putting into operation
Clean the appliance and the interior parts thoroughly before putting into operation (see
chapter 4).
11.1 Switch appliance ON/OFF
1. Connect the appliance to the mains power supply.
à When the appliance door is opened, the interior light comes on.
2. To switch on the appliance, turn the temperature regulator from OFF to the right
to the desired cooling level. The temperature regulator is located at the top right
side in the interior of the appliance.
3. To switch off the appliance, turn the temperature regulator to the OFF position.
ATTENTION
APPLIANCE DAMAGE!
Do not switch on the appliance immediately after a power interruption. Possible overload
of the compressor or fuse blows.
Setting the temperature
The temperature depends on certain factors, such as the place of
installation, how often the appliance door is opened and closed or how
the appliance is loaded.
The settings (1, 2, 3, 4, 5, 6, 7) are not temperatures, but cooling levels.
1. Adjust the internal temperature of the appliance with the
temperature regulator.
2. Set the temperature regulator to a middle position.
à The appliance reaches its normal working temperature after approx. 2 hours and
is then ready for operation.
Bekijk gratis de handleiding van Exquisit GKS180-GT-430D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Exquisit |
| Model | GKS180-GT-430D |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3573 MB |
