Handleiding
Je bekijkt pagina 30 van 44
Setting up and connecting
Page 30 of 44
13. Place the appliance door on the lower hinge.
14. Swap the position of the door bushing (13) and
the hinge hole cover (14).
15. Tighten the upper hinge (4) with the screws (3)
on the left-hand side of the appliance.
16. Fit the hinge cover (1) on the hinge (4) and the
screw hole cover (1)
10.2 Setting up the appliance
Place the appliance in accordance with the prescribed minimum clearances.
Set up the appliance in a dry, well-ventilated room whose ambient temperature
corresponds to the climate class for which the appliance is designed.
ATTENTION
APPLIANCE DAMAGE!
Leave the appliance to stand for 12 hours after transport to allow the refrigerant to
collect in the compressor. Failure to observe this may damage the compressor and cause
the appliance to fail. This would void all warranty claims.
CLIMATE CLASS
TEMPERATURE RANGE
(SN) Extended temperature range
+10 °C to +32 °C
(N) Temperature range
+16 °C to +32 °C
(ST) Subtropical temperature range
+16 °C to +38 °C
(T) Tropical temperature range
+16 °C to +43 °C
Minimum clearances for ventilation
Air circulation at the rear, side and top of the appliance influences energy consumption
and refrigerating (depending on model). It is essential that the minimum clearances for
ventilation of the appliance are observed as shown in the following drawing. If the
minimum clearances are not observed, the accumulated air cannot escape and the
compressor is in continuous operation, which shortens the life of the appliance.
Bekijk gratis de handleiding van Exquisit GB540-050C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Exquisit |
| Model | GB540-050C |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 4651 MB |
