Exquisit EGSP9614-E-031B handleiding
Handleiding
Je bekijkt pagina 64 van 72
FAULT
POSSIBLE CAUSE
REMEDY
Dishwasher detergent
residues in the
detergent container
The detergent was not
completely rinsed out due to
blocked spray arms
Ensure that spray arms can
rotate freely
Detergent container was
moist when filling the
detergent
Only fill the detergent into the
dry detergent container.
Increased foaming
Spilled rinsing agent
Remove rinsing agent with a
cloth.
Used dishwasher detergent
or machine care products
form too much foam.
Change dishwasher detergent
Noises
Noises during the washing
programme are normal.
These noises are caused by
the gentle removal of food
residues and the opening of
the detergent container.
Codes/programme
display
Meaning
Possible cause and remedy
E1
Prolonged water supply time
Tap is not properly turned on
or water pressure is too low.
Water connection tap is
scaled. Commission an
plumber for checking.
Customer service work will be
charged in this case.
E3
Washing programme
temperature is not reached
Heating element is defective.
Contact After Sales Service.
E4
Flooding
Some parts of the appliance
may have leaks.
Contact After Sales Service.
EC
Error in the flushing control
system
Defective circuit board
Failure of the drain pump or
motor.
E8
Incorrect alignment of the
distributor valve.
Open circuit or rupture of the
distribution valve.
EC
Drain pump defective
Contact After Sales Service.
Ed
Electronics pcb has failed
Power circuit interrupted.
Contact After Sales Service.
Bekijk gratis de handleiding van Exquisit EGSP9614-E-031B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Exquisit |
| Model | EGSP9614-E-031B |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 8882 MB |
