Exakta Exa I handleiding
Handleiding
Je bekijkt pagina 16 van 42
16
C. Elimination of certain faults.
1. Shutter flap 750-401.00 falls back.
a) Remove the top-plate 750-001.00. As under disassembly of camera A.2.
b) Bend apart the adjustment slot in the mirror lifting lever 350.04 U 7, until the lift stroke
suffices and the shutter flap passes the mirror holding lever 750-400.05 by about 0.5mm.
Should the lift stroke not be sufficient in spite of this adjustment, then check and if necessary
replace the Schaltsegment 750-709.00 [the assembly the wind lever fixes to?] and
Aufzugsgetreibe 750-704.00 [the lift linkage].
c) Replace the top-plate. See under Disassembly of Camera A.2 but in reverse order. Check
functioning.
2. Shutter does not engage (Shutter flap 750-401.00 runs closed) [ie. second part of shutter
does not catch and runs with mirror?].
Disassemble camera, as described under Disassembly of Camera A.1 - A.3. For repair method,
see Repair Manual for EXA/EXA I C.2.
3. Mirror 300.21-53 replacement.
See Repair Manual for EXA/EXA I C.3.
4. Frame counter failure.
See Repair Manual for EXA IIa C.6.
5. Synchronisation failure.
See Repair Manual for EXA/EXA I C.5. - Adjusting the flash synchronisation EXA I/63.
6. Checking the film transport.
See Repair Manual for EXA/EXA I C.6.
**********************************
Bekijk gratis de handleiding van Exakta Exa I, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Exakta |
| Model | Exa I |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10839 MB |