Exakta Exa I handleiding
Handleiding
Je bekijkt pagina 10 van 42
10
Adjusting the insulating-part I. [the insulating block under the time-setting disc]
Dismantle the camera, as under Disassembly of Camera AA.1 - AA.2.
aa) At the F-synchronisation the contact spring of insulating-part I must touch the contact pin
(where the connection for the coupling wire 350.22-11 is). If necessary bend the contact
spring accordingly.
bb) Replace the top-plate 350.21 U 1, as under assembly of camera BB.1 - BB.2.
Adjusting the insulating-part II. [the block with the flash contacts on the right below the
wind mechanism]
Dismantle the camera, as under Disassembly of Camera AA.1 - AA.3. Check the F-contact:
cc) Set the time setting disc to 1/30 sec and cock the shutter.
dd) Restrain the shutter flap, release the shutter and let the shutter flap run slowly; the F-
contact must fire as shown in Fig. 7. If this does not occur, the contact spring for insulating-
part II must be bent accordingly.
Bekijk gratis de handleiding van Exakta Exa I, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Exakta |
| Model | Exa I |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10839 MB |