EWT Multipro handleiding

Handleiding

12345678910111213141516171819202122232425262728/ 28

Afdrukken

Je bekijkt pagina 14 van 28

FR EN DE

14

CHARACTERISTICS

MODEL

MUL

TIPRO

Ventilator

Y

es

Heating

Y

es

Air

purier Y

es

Air cooler

Y

es

Air freshener

Y

es

Ionisation

function Y

es

–



lters



mor

e

than

99%

of particles in the air

Heating power

2000W

V

entilation power

70W

Thermostat

Electr

onic

Water tank capacity

5.

5L

Number of temperature choice

3:

22°C, 29°C, 36°C

Number of ventilation speeds

3

Oscillation

Y

es, automatic

Tilting

Y

es, automatic

Timer 1-2-4-8H

Filters

3:



Anti-dust

lter/H

2

0

lter

for

coolerair/

Foamlter

for

air



freshener function

Filter clean indicator

Y

es

Cooling blocks

x 2

Remote

control Yes, with remote

control housing

360° pivoting wheels with brakes on front

Y

es

Voltage 220 - 240V~

Frequency

50Hz

Product dimensions (LxDxH)

25

x 33 x 70cm

Product weight 10kg

BEFORE USING THE APPLIANCE FOR THE FIRST TIME

1. Please read these instructions carefully before using

the appliance and keep them in case of future use.

2.

Mak

e sure that the voltage of your local electricity

network corresponds to the one which appears on the

appliance.

3. Beforeusingitforthersttime,removetheappliance’s

pr

otective tabs and stickers.

4.

Ensur

e that the switch on the side is in the “OFF”

position.

SWITCHING ON/OFF

PLUGGING IN AND SWITCHING ON

Before plugging the appliance in, please read

the “Safety Instructions” and “Warnings”

paragraphs carefully. To switch the appliance

on, press the ON/OFF SAFETY button located

on the side of the appliance. Once this button

has been switched to on, the appliance will go onto standby

mode, two audible “bleeps” will be emitted and the power

light

will



ash



for

twoseconds.

SWITCHING ON

Having pressed the power button on the side of

the appliance, press the “ON/OFF” button on the

control panel to switch the appliance on. It will

emit a single audible “bleep”.

SWITCHING OFF

Press the “ON /OFF” button again to set the appliance to

standby mode when it is operating.

In ventilation mode, pressing this button allows you to set

the appliance to standby mode.

In heating mode, the radiator will stop working after 10

seconds as a safety measure and then the entirety of the

system will be deactivated.In order to switch the appliance

off completely, press the big “ON/OFF” button located on the

side of the product.

ENERGY-SAVING NIGHT LIGHTING MODE

If there is no activity for more than a minute, the intensity of

the light emitted by the indicators will fall by 33%.

COOLER

TANK FILLING

WARNING: Do not place anything in the

separation compartment such as the cooling

blocks. This allows the pump to drop into the

water tank (see photo). If not, there is a risk of the tank

becoming blocked.

Water tank

locked

(Fig.1)

Water tank

unlocked

(Fig.2)

Remove

water tank

(Fig.3)

Put water into

the water tank

(Fig.4)

In order to use the appliance in cold mode, remove the water

tank by turning the lock located at the back and on the base

of the appliance.

Before pouring water into the tank, turn the locking system

through 90° (Fig.2) in order to remove the water tank (Fig.3).

When pouring the water, (Fig.4), pay careful attention to the

level in the tank, which must not be below the “MIN” level

marker or above the “MAX” level marker. Carefully replace the

tank into the appliance and turn the locking system (Fig.1) to

block the tank in. Check that the water is clean.

Itisnormalfortheappliancetoemitanodourthersttime

y

ou use it.

12345678910111213141516171819202122232425262728/ 28

Bekijk gratis de handleiding van EWT Multipro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Heater