EWT ECO15C2B handleiding

43 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 4 van 43
ELECTRICAL CONNECTION
WARNING THIS APPLIANCE MUST BE EARTHED
Assembly and Positioning
FITTING THE CASTORS
WARNING The radiator must only be operated with the
wheels and castors tted and in the upright position.
The castors must be tted to the control panel and on the
bracketbetweenthelastandsecondlastnontheopposite
end, as shown in Fig.1.
Totthecastors,turntheradiatorupsidedownonacarpetor
other soft surface to avoid damage
Warning : The radiator is heavy – ensure that it is supported
to prevent it from toppling. Ask a second person to help with
this if necessary.
Totthecastors,positionthecastorplates(A)inpositionand
secure using the wing bolts (B). there are guides to ensure the
correct positioning and orientation of the caster plate.
Return the radiator to the correct orientation so it rests on the
castors. The product is now ready for use.
POSITIONING THE HEATER
Select the position for the heater ensuring there is clearance
fromanyfurnitureandttingsofatleast300mmabovethe
heater and 150mm each side and 300mm from the control and
end panel. We recommend maximising the clearance where
possible.
Models & General Information
MODELS
Model Description
Power
(W)
ECO15
5n,thermostat,threeheatsettings&
Neon
1500
ECO15C2A
5n,thermostat,threeheatsettings,neon
& electro mechanical timer
1500
ECO15C2B
5n,thermostat,threeheatsettings,neon
& electronic 7 day timer
1500
ECO20
7n,thermostat,threeheatsettings&
Neon
2000
ECO20C2A
7n,thermostat,threeheatsettings,neon
& electro mechanical timer
2000
ECO20C2B
7n,thermostat,threeheatsettings,neon
& electronic 7 day timer
2000
ECO25
11n,thermostat,threeheatsettings&
Neon
2500
ECO25C2A
11n,thermostat,threeheatsettings,neon
& electro mechanical timer
2500
ECO25C2B
11n,thermostat,threeheatsettings,neon
& electronic 7 day timer
2500
GENERAL
The radiator is designed for operation on an AC electricity
supply, and is suitable for use in domestic dwellings and similar
indoor locations.
The radiator is tted with castors and a handle for ease of
movement. A rotary selector switch provide the ability to
chooseanavailableheatoutputandanadjustablethermostat
enables the room temperature to be controlled accordingly. It
is supplied with a cord and plug and is ready for use once the
castorshavebeencorrectlytted.
Operation
IMPORTANT - OBJECTS OR CLOTHING MUST NOT BE
PLACED ON THIS HEATER.
Before using the heater ensure that all warnings and instructions
have been read carefully.
Once the castors have been tted, to activate the heater
simply plug it in. Neon indicating lights (i, see
Fig 2
) located at
the controls area will illuminate when the appliance is plugged
into the mains. This indicates the appliance is energised and
ready for use.
CONTROLS (See Fig. 2 & 3)
Thermostat (T)
The Thermostat controls the heat output according to the room
temperature. This ensures that the heater will not produce heat
unnecessarily when the room is warm. To set the temperature
you require, turn the thermostat knob clockwise until the
requiredsettingisreached.Alternativelytoheatacoldroom
quickly,turnthethermostatknobupfully.Whentheroomhas
reached the desired temperature, turn the thermostat knob
anti-clockwiseuntilthethermostatjustclickso.Theheaterwill
now automatically operate at this temperature. The thermostat
also has a frost protection setting marked ‘ ‘. This setting is
useful in areas such as garages, to prevent frost damage. If the
thermostat is set to its minimum setting ‘ ’,the heaterwill
cycleonandotomaintainatemperatureofapproximately
5° to help protect against frost.
Note – Should the heater fail to come on when the thermostat
is at a low setting, this may be due to the room temperature
being higher than the thermostat setting.
Heat Selector Switch (S)
Heat selection is provided via a rotary switch oering four
settings. The heat output can be altered to suit the application,
conditions and for improve the economy of operation.
Available output options are as follows:
Switch setting
Model O I II III
ECO15(C2*)
O 500W 1000W 1500W
ECO20(C2*)
O 600W 1400W 2000W
ECO25(C2*)
O 800W 1700W 2500W

Bekijk gratis de handleiding van EWT ECO15C2B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkEWT
ModelECO15C2B
CategorieNiet gecategoriseerd
TaalNederlands
Grootte9097 MB

Caratteristiche Prodotto

Soort bedieningDraaiknop
Kleur van het productWit
Gewicht9750 g
Breedte389 mm
Diepte281 mm