EVOLVEO Encrypt1 handleiding
Handleiding
Je bekijkt pagina 7 van 10
4. Structure introduction
① Red indicate light
② Yellow indicate light
③ Green indicate light
④ Blue indicate light
⑤ Number key 0~9
⑥ Enter key
⑦ Cancel key
⑧ USB 3.0 date line jack
NOTE: The blue light stands for effectiveness instructions, if you button
blue light is not flashing, it shows your operation is failed and you need
have more operation.
5. Initial installation of ENCRYPT 1
1. Connect the drive into a device.
2. Press and hold buttons 1 and 3 on the keypad of the HDD frame and connect to
the USB port (PC/notebook).
3. The green LED starts to flash and after a while the red LED lights up, then release
the buttons 1 and 3.
4. If both LEDs are lit up, you can proceed to the step 5. If not, repeat steps 1 and 2.
5. Press and hold the "hash" button (bottom right) for 5 seconds, the yellow LED
lights up, now the red, yellow and green LEDs are lit up at the same time.
Bekijk gratis de handleiding van EVOLVEO Encrypt1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EVOLVEO |
| Model | Encrypt1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1902 MB |
