Handleiding
Je bekijkt pagina 9 van 50
9
ELYPSO
Under no circumstances should you connect the USB data cable before installation of the printer driver is complete.
To save energy, the printer will automatically switch itself to standby mode after 10 minutes of inactivity. The printer switches to hibernation
mode after 30 minutes in standby mode.
The standby times can be congured in the Evolis Print Center. In standard standby mode, sending a print request restarts the printer and
quickly pressing (for 1 second) on the button exits the printer from hibernation mode.
Before attempting any maintenance, ensure that the power cable is always unplugged. For your personal safety, ensure that the cable and
power supply unit remain easy to access, especially in the event of an emergency.
INSTALLATION
Connecting the printer
Connection to the power supply
See "Installing the print driver", page 13 for further details, and follow the instructions carefully.
• Connect the power cable to the power supply unit, then plug the power supply unit connector into the
printer.
• Next, plug the end of the power cable into an earthed power socket.
• The printer is powered on: the control panel lights up showing the printer is working properly. If the control
panel does not light, then either installation has not been carried out correctly or the printer is not working
properly. Check the installation.
!
The printer must be connected to a properly protected and earthed electrical installation.
FI: Laite on liitettävä suojamaadoitus koskettimilla varustettuun pistorasiaan.
NO: Apparatet må tilkoples jordet stikkontakt.
SE: Apparaten skall anslutas till jordat uttag.
DK: Printeren skal tilsluttes til en korrekt beskyttet og jordforbundet el-installtion.
Connecting the USB cable
!
NOTE
!
Bekijk gratis de handleiding van Evolis Elypso, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Evolis |
| Model | Elypso |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 14453 MB |
