Handleiding
Je bekijkt pagina 8 van 25
CONNECTING THE PRINTER
Connecting to the main power supply
This product must be connected to an electrical installation that is
correctly protected and grounded.
FI: Laite on liitettävä suojamaadoitus koskettimilla varustettuun pistorasiaan.
NO: Apparatet må tilkoples jordet stikkontakt.
SE: Apparaten skall anslutas till jordat uttag.
1 Connect the power cord to the power supply unit, then attach
the power cord to the printer.
2 Connect the power supply unit to a grounded system outlet (plug socket).
3 The printer is under power. The light on the control panel comes on and the print head rises and falls to indicate
the correct mechanical working of the printer. If the light fails to come on, the installation has not been carried
out correctly or possibly that the printer is not working properly. - check the installation.
Prior to any maintenance action, always disconnect the power supply cable.
For your own safety, these components must remain accessible at
all times to permit emergency action.
Connecting the USB interface cable
Only connect USB interface cable when requested by the Drivers program.
Refer to Chapter 5 - Installing the Drivers.
6
8
Bekijk gratis de handleiding van Evolis Badgy 101, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Evolis |
| Model | Badgy 101 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 14861 MB |
