EverFocus EQN100 handleiding
Handleiding
Je bekijkt pagina 4 van 46
ii
Precautions
1. Do not install the camera near electric or magnetic fields.
Install the camera away from TV/radio transmitters, magnets, electric motors,
transformers and audio speakers since the electromagnetic fields generated from these
devices may distort the video image or otherwise interfere with camera operation.
2. Never disassemble the camera beyond the recommendations in this manual nor
introduce materials other than those recommended herein.
Improper disassembly or introduction of corrosive materials may result in equipment
failure or other damage.
3. Try to avoid facing the camera toward the sun.
In some circumstances, direct sunlight may cause permanent damage to the sensor
and/or internal circuits, as well as creating unbalanced illumination beyond the capability
of the camera to compensate.
4. Keep the power cord away from water and other liquids and never touch the power cord
with wet hands.
Touching a wet power cord with your hands or touching the power cord with wet hands
may result in electric shock.
5. Never install the camera in areas exposed to oil, gas or solvents.
Oil, gas or solvents may result in equipment failure, electric shock or, in extreme cases,
fire.
6. Cleaning
For cameras with interchangeable lenses, do not touch the surface of the sensor directly
with the hands. Use lens tissue or a cotton tipped applicator and ethanol to clean the
sensor and the camera lens. Use a damp soft cloth to remove any dirt from the camera
body. Please do not use complex solvents, corrosive or abrasive agents for cleaning of any
part of the camera.
7. Do not operate the camera beyond the specified temperature, humidity or power source
ratings. Use the camera at temperatures within 0°C ~ 50°C / 32°F~122°F (12 VDC), and
humidity between 20% and 80%; this device is not rated as submersible. The input power
source is 12 VDC. Be sure to connect the proper + / - polarity and voltage, as incorrect
polarity or too high a voltage will likely cause the camera to fail, and such damage is not
covered by the warranty. The use of properly fused or Class 2 power limited type supplies
is highly recommended.
8. Mounting
Use care in selecting a solid mounting surface which will support the weight of the camera
plus any wind, snow, ice or other loading, and securely attach the camera to the mounting
surface using screws and anchors which will properly support the camera. If necessary (e.g.
when mounting to drop ceilings) use a safety wire to provide additional support for the
camera.
Bekijk gratis de handleiding van EverFocus EQN100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EverFocus |
| Model | EQN100 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 13688 MB |
