EverFocus EHN2250-SG handleiding
Handleiding
Je bekijkt pagina 39 van 91
Value IPCam-SG Series – H265, 2MP / 5MP / 8MP
33
3.5.1.6 CC (Crossing Counting)
The IP camera will count the times when objects (motion, person or vehicle) cross a pre-defined
line, and the Cross-Counting event will be triggered. You can configure some event actions like
event recording, Email alert or pop-up full screen when an event is triggered.
[Crossing Counting Settings ] : You can configure the Cross Counting settings here.
Enable: Enable or disable this function.
Sensitive: The sensitivity of triggering video tempering detection can be set as 1-4. The larger
the value is, the more sensitive the occlusion alarm is. The default sensitivity of perimeter
intrusion detection is set as 2.
Dynamic Marking: can choose to show or not show the track.
Type: There are three types. Motion, Person , and Vehicle.
Alarm Number: Count the number of alarms, set the value from 1-255.
Start Time: Set alarm start time.
End Time: Set alarm end time.
Rule Number: Draw a rule area on the area map, The rule switch and rule type of each rule are
independent, and they need to be opened, closed or set separately.
Rule Switch: The switch to every rule.
Rule Type: Setup to each rule, A->B means can detect A to B direction moving, B->A means can
detect B to A direction moving.
Click Refresh to refresh the page; click Save to save the settings.
Bekijk gratis de handleiding van EverFocus EHN2250-SG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EverFocus |
| Model | EHN2250-SG |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 29226 MB |
