EverFocus EHN2250-SG handleiding
Handleiding
Je bekijkt pagina 21 van 91
Value IPCam-SG Series – H265, 2MP / 5MP / 8MP
15
3.2.4 ROI
You can configure the ROI settings on this page.
Bitrate: Select a stream type to be applied with the ROI bitrate.
ROI ID: Up to 8 ROI areas can be configured for each stream type.
Enable ROI: Select Enable to enable the configured ROI area(s).
ROI Level : Select an ROI level for each area. The higher the level, the better the image quality in ROI area.
Non-ROI FPS (1-29): Select a FPS to be applied to the non-ROI areas. Lower FPS can not only reduce the
bandwidth, but also increase the recording time to the on-camera SD card.
Click Refresh to refresh the page; click Apply to save the settings.
To set up ROI:
1. Set up the configurations including Bitrate, ROI ID, Enable ROI, ROI Level and FPS for the Non-ROI FPS.
2. On the preview window, draw a rectangle area (red color) to apply with the ROI. You can only configure 1
ROI area for each ROI ID. Up to 8 ROI ID can be configured.
3. To delete the ROI area, click the Clear button.
4. Click the Apply button to apply the settings.
Bekijk gratis de handleiding van EverFocus EHN2250-SG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EverFocus |
| Model | EHN2250-SG |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 29226 MB |
