EverFocus EBN2840-SG handleiding
Handleiding
Je bekijkt pagina 45 van 91
Value IPCam-SG Series – H265, 2MP / 5MP / 8MP
39
3.5.1.9 QD (Queue Length Detection)
[Queue Length Detection Settings ] : You can configure the Queue Length Detection settings here.
Enable: Enable or disable this function.
Sensitive: The sensitivity of triggering video tempering detection can be set as 1-4. The larger
the value is, the more sensitive the occlusion alarm is. The default sensitivity of perimeter
intrusion detection is set as 2.
Dynamic Marking: can choose to show or not show the track.
Min Pixel: The lowest pixel setting of human and vehicle. When the recognized object is smaller
than the pixel, no alarm is generated accordingly. It can be set to 32-1080. Note: the figure
recognition function recognizes the whole picture as a 1080p picture.
Max Detection Number: The number of detection can be set from 1-100.
Max Pro Time: The alarm will be triggered if no one has left the area for more than the set time，
can be set to 1-3600.
Detection Range: There are two modes for setting detection area.
- Full Screen: The detection area is the camera all cover area.
- Customize: Select this mode and a region box will appear on the small window. Click the red
small box next to the digital ID of the region box to drag or stretch the region.
Rule Number: Only one rule is allowed to be turned on. The entire screen has been checked in
the default area. If you need to customize the area, check the box in the upper left corner of the
screen, and drag the points placed at the four corners of the screen to re-divide the detection
area.
Rule Switch: The switch to rule.
Bekijk gratis de handleiding van EverFocus EBN2840-SG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EverFocus |
| Model | EBN2840-SG |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 29226 MB |
