EverFocus EBN2840-SG handleiding
Handleiding
Je bekijkt pagina 34 van 91
Value IPCam-SG Series – H265, 2MP / 5MP / 8MP
28
To configure the Perimeter intrusion settings :
1. In the Setup field, click to set up the perimeter intrusion settings. Please refer to
[Perimeter
Intrusion Settings ] above.
2. To draw an area:
a. Use your mouse to click 4 points to draw a rectangle shape. The shape should be convex.
Concave shape is not allowed.
b. If you want to move the area to other position or re-size the area, select the area by
checking the red box on the upper-left corner of the area, the borders of the area will
change to red color. Drag and drop the area to a desired position. Drag the red dots at
the edge of the area can re-size the area.
c. Click the Save button to save the settings.
d. You can click the Clear button to remove all the areas. To remove a certain area, select
the area by checking the red box on the upper-left corner of the area, and then click the
Delete button.
Note : The detection areas should not be too narrow or small in order to enhance the
detection rate.
3. To further set up the alarm notifications and enable the recording function, click the Alarm
button at same page of AI to enter the Alarm setting page. Please refer to 3.5.3.5 Pedestrian
intrusion.
Bekijk gratis de handleiding van EverFocus EBN2840-SG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EverFocus |
| Model | EBN2840-SG |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 29226 MB |
