EverFocus EBN2840-SG handleiding
Handleiding
Je bekijkt pagina 23 van 91
Value IPCam-SG Series – H265, 2MP / 5MP / 8MP
17
3.3.2 Record
3.3.2.1 Record
You can configure the record settings on this page. Please note that to enable the record function, a micro
SD card has to be inserted to the IP camera in advance. Please also format the micro SD card for the
first-time use (refer to 3.6.1 HDD).
Stream Mode: Select a recording stream mode.
Record: Switch the button to the right to enable the record function. Please note that to enable the
record function, a micro SD card has to be inserted to the IP camera in advance. Please also format the
micro SD card for the first-time use.
Pre-Record: Switch the button to the right to enable the pre-record function for all the alarm recordings.
The camera will start recording 10 seconds before the alarms occur.
Network Failed: Switch the button to the right to enable the network failed function. When the network
is disconnecting, the IP camera will start recording until the network connection is back to normal.
Click Refresh to refresh the page; click Save to save the settings.
Note:
1. To configure the recording storage path, please refer to 3.8.5 Local Settings.
2. After setting up the Record settings, you can optionally set up the Record Schedule, please refer to
3.3.2.2 Record Schedule.
Bekijk gratis de handleiding van EverFocus EBN2840-SG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EverFocus |
| Model | EBN2840-SG |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 29226 MB |
