EverFocus EBN2840-SG handleiding
Handleiding
Je bekijkt pagina 18 van 91
Value IPCam-SG Series – H265, 2MP / 5MP / 8MP
12
You can configure the image settings on this page.
Day/Night Mode: Select a Day/Night mode for the camera to display the color or B/W images.
• Auto: Select Auto for the camera to automatically switch to day or night mode. You can further set
up a Delay Switch time (second) in the below field.
• Color Mode: Select Color Mode for the camera to display color images.
• Black White Mode: Select Black White Mode for the camera to display B/W images.
• Schedule (B/W): Select Schedule (B/W) for the camera to display B/W images during the setup time
range. Please select the Start Time and End Time in the below field.
Delay Switch (s): This function can only be activated if you select Auto for the Day/Night Mode. Set up a
delay switch time (seconds) for the camera to auto switch between day and night modes.
IR-LED: Select On to turn on IR LEDs; select Off to turn off IR-LED; select Auto for the camera to
automatically turn on / off the IR-LED based on the light sensor on the IP camera.
Low Beam Light: Adjust the Beam Light value.
High Beam Light: Adjust the Beam Light value.
Angle Trad: Select an Angle.
Mirror: Switch the button to the right to enable the Mirror function. The image will be rotated
horizontally around a vertical axis.
Backlight: Select to enable the backlight function.
White Balance:
• Auto: Select for the camera to automatically adjust the white balance.
Bekijk gratis de handleiding van EverFocus EBN2840-SG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EverFocus |
| Model | EBN2840-SG |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 29226 MB |
