EverFocus EBN2840-SG handleiding
Handleiding
Je bekijkt pagina 11 van 91
Value IPCam-SG Series – H265, 2MP / 5MP / 8MP
5
2.3 Connecting the Camera to the Network
There are three methods to connect the IP camera to the network: Router or LAN Connection,
One-to-One Connection and Direct High-Speed Connection.
Router or LAN connection
This is the most common connection in which the IP camera is connected to a router and allows
multiple users on and off site to see the IP camera on a LAN / WAN (Internet). The camera must be
assigned an IP address that is compatible with its LAN. By setting up port forwarding on the router,
you can remotely access the cameras from outside of the LAN via the Internet.
High
-speed modem
Internet
Straight
-through LAN patch cable
Router
Cat
5
Straight Through Cable
Left
: Pinout of a straight
-
through cable.
One-to-One Connection (Directly from PC to IP Camera)
You can connect directly without using a switch, router or modem. However, only the PC connected to
the camera will be able to view the IP camera. You will also have to manually assign a compatible IP
address to both the computer and the IP camera. Unless the PC has another network connection, the
IP camera will be the only network device visible to the PC. See the diagram below:
Cat 5
Right: Pinout of a crossed-over cable.
Bekijk gratis de handleiding van EverFocus EBN2840-SG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EverFocus |
| Model | EBN2840-SG |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 29226 MB |
