EverFocus EBN2540-SG handleiding
Handleiding
Je bekijkt pagina 12 van 17
11
6. Installation
6.1 EZN models
1. Drill three holes on the surface according to the screw positions on the
Camera Base. Push the supplied 3 Screw Anchors into the holes. Drill another
hole in the middle within the 3 screw holes if you wish to run the wires into
the surface. Screw the camera to surface using the supplied 3 Screws.
Mounting Screws
Screw Anchors
2. Adjust the pan/tilt/rotate angles of the camera by loosen the Pan/Tilt screws
using the supplied Hexagon Wrench.
Tilt Screw
Pan Screw
3. Connect the camera to power. You can either connect the camera to a 12VDC
power source or to a PoE switch using the PoE cable.
4. Connect the camera to the network using the supplied Cable Gland Kit. See 5.
Cables.
5. Insert a Micro SD card into the card slot (optional).
6. Now you can access the camera live view. See 7. Accessing the Camera.
Bekijk gratis de handleiding van EverFocus EBN2540-SG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | EverFocus |
| Model | EBN2540-SG |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 6180 MB |
