Eventide H9000 Madi handleiding
Handleiding
Je bekijkt pagina 71 van 140
Mute/Bypass
Press the Mute/Bypass so key to mute the currently highlighted FX chain. Press it again to unmute the FX
chain. When muted, a red FX MUTE label will appear at the boom of the FX chain block.
Long-press the Mute/Bypass so key to bypass the currently highlighted FX chain. Long-press it again to
un-bypass the FX chain. When bypassed, a red FX BYPASS label will appear at the boom of the FX chain
block.
Gain/Levels
Short-press the latching Gain/Levels so key to adjust the output gain levels of the FX chains present in the
currently loaded session. Similar to the Mix mode, the display will show level controls for each FX chain. Use
the cursor keys to navigate to the FX chain for which you wish to adjust the level, and then use the wheel to
adjust the output gain.
Long-press the latching Gain/Levels so key to show signal levels for the audio inputs/outputs of the
currently highlighted FX chain.
Addional so keys are available in the Gains/Levels screen:
Control Map: Press the latching Control Map so key to view external control mapping opons for Gains/
Levels. Refer to Secon 4.5: Parameters for more informaon about external controller mapping.
Clear Clip: Press the Clear Clip so key to clear any overloads that are displayed on the I/O meters.
Group: Press the latching Group so key to group together the inputs or outputs of the selected FX chain
input or output level. When the latching so key is illuminated, adjusng the level of either group’s fader
will adjust the level all faders in each grouping.
•
•
•
4. FRONT PANEL OPERATION
71
Bekijk gratis de handleiding van Eventide H9000 Madi, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eventide |
| Model | H9000 Madi |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16632 MB |
