Eventide H9000 Madi handleiding
Handleiding
Je bekijkt pagina 63 van 140
4. FRONT PANEL OPERATION
In this secon, we will show you how to navigate the H9000 front panel and operate the unit.
Note
This chapter is not necessary for the H9000R, which has no front panel controls.
4.1. Geng to know your H9000
4.1.1. Signal Roung
There are a few general “rules” about signal roung in the H9000 which are useful to keep in mind.
You can only use one digital audio protocol at any given me. This will be determined in your
Digital Audio Mode setup.
When using S/PDIF over the opcal ADAT connectors, you can only work at sample rates of
44.1kHz and 48kHz. Sample rates of 88.2kHz and 96kHz are not supported.
FX chains support 32 inputs and 32 outputs. The outputs of an FX chain can be “multed” to an
arbitrary number of physical Input/Output channels, computer audio interface channels, etc.
4.1.2. So Keys
The H9000 user interface has context-sensive “so keys” on the le and right sides of the display.
There are two different types of so keys on the H9000:
“Normal” so keys: These execute their labeled acon when pressed.
“Latching” so keys: When pressed, they change the front panel display to a different state. Think
of the latching so keys as a quick way to access “sub-menus” or alternate screens on the H9000.
Latching so keys are visually disnguished by a small triangular “flag” in the top corner of the key.
•
•
•
•
•
4. FRONT PANEL OPERATION
63
Bekijk gratis de handleiding van Eventide H9000 Madi, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eventide |
| Model | H9000 Madi |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16632 MB |
