Eventide H9000 Madi handleiding
Handleiding
Je bekijkt pagina 29 van 140
2.1.10.3. Network Configuraon
To change your H9000’s network configuraon, press the IP CONFIG so key. Choose “DHCP” to
iniate a request for an IP address, or “Manual” to configure a stac address.
Note
Your H9000’s network configuraon sengs will be set to DHCP as the default seng and will not
require further configuraon in most situaons. Manual IP addressing should only be used if there
is no DHCP server on the network, or the DHCP server is configured to exclude a range of manual
addresses.
2.1.10.4. Creang a Local Access Point
The H9000 also has the ability to create and broadcast its own Wi-Fi network, called an “access point”.
You can use the Emote soware with the H9000 on this private network in environments where there
is no LAN for the H9000 and the computer running Emote to connect to each other.
To create an Access Point:
Press the START WIFI A/P so key.
You can choose to enter a custom password, or leave the password field blank.
If you leave the password field blank, a password will automacally be generated. This will be your
H9000’s serial number in the format “9K-XXXXX”.
You will then see a message that the Access Point has been created.
The Wi-Fi access point will appear in your computer’s network sengs as “H9000” followed by a
string of automacally generated characters, or the custom name you have assigned to your unit.
•
•
•
•
•
2. SETUP
29
Bekijk gratis de handleiding van Eventide H9000 Madi, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eventide |
| Model | H9000 Madi |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16632 MB |
