Eventide BD600+ handleiding

Handleiding

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364/ 64

Afdrukken

Je bekijkt pagina 7 van 64

Front Panel

See Chapter 2 for in-depth explanation of the following controls, or look up individual terms in the In-

dex.

The front panel buttons have indicator lights which are lit when a function is available, with the excep-

tion of BYPASS, which is always available.

A flashing light indicates that the function is active. Pressing a button when it is flashing will cancel

the function.

The CONFIG button and configuration mode are intended to be used by an authorized operator only

and thus their operation is intentionally less obvious. See Chapter 3 for configuration mode infor-

mation.

Since the BD600+ can serve as a broadcast profanity delay or as a precision fixed delay, many of the

buttons have multiple functions, including navigating the configuration menus (discussed in Chapter

3). Each of the buttons reflects its profanity delay function.

At times during start-up, the display will scroll text giving a question requiring a yes/no answer. At

these times, the WAIT AND EXIT button will flash, indicating “yes” and the REBUILD button will be

lit solidly, indicating “no.” All other buttons will be off. Usually, the “yes” answer is expected.

1 BYPASS

3 CONFIG

5 PANIC

7 WAIT AND EXIT

9 RAMP TO ZERO

11 Delay bar graph

13 Card slot

1) BYPASS Button

Toggles the unit in and out of bypass. While bypassed, the LED flashes and the audio path through the BD600+

is bypassed either electronically or by a relay. Pressing this button while bypassed will take the unit out of by-

pass. This button is also used to exit from configuration mode.

2) Input Status

These LEDs indicate whether the BD600+ is configured for analog or digital input. If the digital input

LED is flashing, it indicates that the unit is not locked to the sample sync input.

3) CONFIG Button

Enters configuration mode.

 See Chapter 3 for information on Configuration.

4) Level Meters

Two 10-segment LED bar graphs show audio input levels. These graphs act as meters and may be used

to align the equipment to ensure that appropriate audio levels are presented to the BD600+.

5) PANIC Button

In profanity delay mode, dumps the entire delay, and either plays a jingle from the card or mutes the

output for a configurable period. During this process the delay is filled in real time.

 See More Information on the PANIC feature on page 17

6) WAIT FOR SAFE Button

In profanity delay mode only, initiates or cancels the wait for safe mode, which is used to start a show

with a safe amount of delay.

2 Input sta-

tus

4 Level Meters

6 WAIT FOR SAFE

8 REBUILD

10 SNEEZE

12 Delay numeric display

14 Dump

BD600 BROADCAST DELAY

CLIP

BYPASS

CONFIG

ANALOG

DIGITAL

INPUT

LEVEL

PANIC WAIT FOR

SAFE

WAIT AND

EXIT

REBUILD RAMP TO

ZERO

SNEEZE

R

DUMP

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364/ 64

Bekijk gratis de handleiding van Eventide BD600+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd