Eventide BD600+ handleiding
Handleiding
Je bekijkt pagina 42 van 64
Appendix B BD600E+ Extended Remote Control
Page 38 Appendix B Extended Remote Control BD600+ Profanity Delay
Document Version 2.3
Parallel Inputs
There are 16 input controls, IN 1 to IN16. These inputs are opto-isolated and can be driven with a
voltage of either polarity between 5 and 25 volts. They may be configured to remotely duplicate exist-
ing push buttons or to provide other functions that cannot be achieved with the normal front panel con-
trols. These inputs may also be configured to feed the corresponding outputs, delayed by the length of
the audio delay. It is possible, but not always wise, to combine the delay and control functions. Note
that most of these inputs do not function when the unit is bypassed.
The activity light on the rear panel will light briefly if any of these inputs change.
OFF the control input is disabled. It can still
be used as a delay source.
BYP same as BYPASS button
CNF same as CONFIG button
WFS same as WAIT FOR SAFE button
WAE same as WAIT AND EXIT button
REB same as REBUILD button
RMP0 same as RAMP TO ZERO button
SNEZ same as SNEEZE button
DUMP same as DUMP button
PANC same as PANIC button
LIVE go immediately to zero delay. May
cause a discontinuity in output audio
STAT go to static mode - cancel any
REBUILD or RAMP TO ZERO opera-
tion
FULL go at once to maximum delay. May
cause a discontinuity in output audio
MUTE mute the audio outputs while active
SBRK see page 35 for information on the Sta-
tion Break Insert feature
RTB Ramp To Bypass – RAMP TO ZERO,
then BYPASS the unit
D-R DUMP, then REBUILD
W-R if live, go to REBUILD else WAIT
AND EXIT
0-R if live, go to REBUILD else RAMP TO
ZERO
ONE make jingle ONE the current jingle
TWO make jingle TWO the current jingle
THRE make jingle THREE the current jingle
FOUR make jingle FOUR the current jingle
INS go to insert mode while active (see In-
sert Operations below)
The default values for IN1-16 are as follows (note that prior to V1.4 IN5-16 defaulted to OFF):
IN1 BYP
IN2 DUMP
IN3 SNEZ
IN4 PANC
IN5 WFS
IN6 WAE
IN7 REB
IN8 RT0
IN9 LIVE
IN10 STAT
IN11 FULL
IN12 MUTE
IN13 SBR
IN14 INS
IN15 ONE
IN16 TWO
Bekijk gratis de handleiding van Eventide BD600+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eventide |
| Model | BD600+ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3523 MB |