Eventide BD600+ handleiding

Handleiding

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364/ 64

Afdrukken

Je bekijkt pagina 34 van 64

Configuration Variables

Page 30 Chapter 3 Configuration BD600+ Profanity Delay

Document Version 2.3

INPT

Input source

This variable determines whether the ANAlog or digital input is used. If it is changed, it will usually also

be necessary to change the SYNC variable accordingly. BD600W+adds WNET as a source, selecting the

configured WheatNet-IP network source.

 See Selecting the sample rate on page 9,

JING

Select current Jingle

Select which of the four possible jingles (ONE, TWO, THRE or FOUR) on the Compact Flash card is active.

Note that the jingle file will only be recognized if it is in the correct format. A BAD JINGLE message will

appear briefly if an unsuitable or absent jingle file is selected.

Jingles should not be changed while they are being played as this will cancel the playback operation.

 See Jingle files on the card on page 17 for more information.

LOCK

Lock Front Panel

The front panel lockout feature allows most front panel buttons to be disabled, allowing protection

against undesired operations when the unit is to be exclusively remote controlled. When LOCK is ON, all

keys except for BYPASS and CONFIG will be disabled. Pressing any other key will cause the display

to flicker, and an ‘L’ to be displayed.

PANC

Panic Mute Time

If no suitable jingle is found on the Compact Flash card (or if the card is not inserted), this variable de-

termines how long the outputs will mute when PANIC is pressed. In this case, if it is set to OFF, the

PANIC feature is disabled, otherwise this variable will be ignored if the selected jingle is present.

PASS

Password

Where some modicum of security is needed, this value may be changed to the identifier of a front

panel button. If set, a user would have to go to BYPASS, press and hold CONFIG, then press the se-

lected additional front panel button before releasing CONFIG, in order to get into configuration mode.

A selection of NONE indicates that no second button is required.

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364/ 64

Bekijk gratis de handleiding van Eventide BD600+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd