Eventide BD600+ handleiding
Handleiding
Je bekijkt pagina 10 van 64
Page 6 Chapter 1 Introduction BD600+Profanity Delay
5) Wordclock in
An external Wordclock signal may be used as a
sample clock source. A Wordclock signal will
usually offer a more stable clock source than
that supplied by an AES/EBU signal.
See page 9 to use Wordclock
6) Wordclock out
The BD600+ outputs a Wordclock signal of its
current sample clock – this may be used to syn-
chronize other equipment to it.
7) RS232 Control Connector
This is a female 9-pin DB9 connector supplied
to connect a remote computer or terminal. The
remote computer or terminal can control all
functions of the BD600+ including configura-
tion. This connector is only functional if there
is no USB connection.
See page 41 for information on RS232 remote control.
This connector may also be used for software
maintenance purposes.
Digital Audio Inputs and Outputs
These are XLR differential AES/EBU connec-
tions for stereo input and output channels.
8) AES/EBU in
9) AES/EBU out
Use these connectors to connect professional
digital audio equipment to the BD600+. The
cables should be differential with a shielded
twisted pair.
See page 9 to configure the BD600+ to use AES/EBU.
Analog Audio Inputs and Outputs
These are XLR differential audio connections
for two input channels and two output chan-
nels.
10) Channel 1 Output
11) Channel 2 Output
Male XLR connectors.
12) Channel 1 Input
13) Channel 2 Input
Female XLR connectors.
Remote and other Connectors
14) Delayed RS232 in
15) Delayed RS232 out
These are 9 pin DB9 connectors where the in-
put is delayed by the amount of the delay and
fed to the output, usually to drive a clock indi-
cator showing the time of the delayed mate-
rial. They can also be used to delay RS232
control signals.
16) Activity Indication
These LEDs will flash when there is a change
of state on the adjacent inputs.
17) General Remote Input
This DB25 female connector has 16 bipolar
optoisolated inputs which can be individually
programmed for use to either control BD600+
functions or to feed the corresponding General
Remote Output.
See page 36 to configure these inputs.
18) General Remote Output
This DB25 male connector has 16 open col-
lector outputs which may be individually pro-
grammed to supply BD600+ status or a de-
layed version of the corresponding input.
19) Network Connector
This is a Gigabit Ethernet connector for con-
nection to the WheatNet IP network.
20) USB
This connector looks like a serial port when
connected to a computer. It can be used for re-
mote control and updating. Note that connect-
ing this port to a computer disables the RS232
port – only one of them can be used at a time.
A device driver must be installed to use this
with Windows 7.
See Installing Windows Drivers on page 54
Bekijk gratis de handleiding van Eventide BD600+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eventide |
| Model | BD600+ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3523 MB |