Handleiding
Je bekijkt pagina 6 van 24
SC3070
First Steps
6
OPERATION
3. OPERATION
3.1. First Steps
Rear Connections & DIP Switches
Check the package components (loudspeaker, user’s manual, power cord,
grille, rubber feet);
Check the voltage setting (see “Mains Voltage Selector”).
Check the setting of the DIP Switches (variable).
Connections: there are two input connectors on the rear side. These allow
the connection of balanced sources with XLR connectors or unbalanced
sources with RCA connectors.
• Pin assignment XLR: 1= Shield, 2= hot (+), 3= cold(-).
• Pin assignment RCA: Center conductor= Signal, Ring= Shield.
Both analog inputs can be used simultaneously, whereby the signals are
summed.
Depending on the setting of the Max. Input DIP switch on the rear panel,
the maximum level of the source signal should not exceed +7dBu or
+22dBu (see Max. Input). If the input is overloaded the LED ring will start
blinking.
Bekijk gratis de handleiding van Eve Audio SC3070, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eve Audio |
| Model | SC3070 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2060 MB |
