Handleiding
Je bekijkt pagina 10 van 24
SC3070
Low Filter
10
OPERATION
3.7. Settings Menu
Press the control once to enter the Settings menu. Here you can set four
dierent lters (High, Mid, Desk, Low), as well as the LED ring’s behavior.
The LED of the currently active function will blink.
Turn the control to choose the lter or LED mode desired. The blinking
LED indicates the function selected, while the steady-on LED indicates the
value assigned to that function.
Press the control to conrm your selection. The blinking will stop once the
selection is conrmed.
Turn the control to adjust the lter or the LED behavior.
When you are satised with the setting, press the control again to go back
to the Settings menu. You can then select and edit another function.
! To exit the Settings menu press and hold the control for three seconds or
simply wait 10 seconds. The loudspeaker will then return automatically to
the Volume mode.
3.8. Filters
The lters of the EVE Audio monitors were specially developed to oer you
the possibility of adjusting your monitoring system to the characteristics
of your room. These lters help correct the alterations to the frequency
response produced by the room acoustics and listening distance. Do bear
in mind that correcting bad room acoustics with lters will only achieve
average results. In any case, you should try to use the lters as little as
possible.
3.9. Low Filter
0
+5
+3
-5
-3
100 1k 10k
dB
Hz
The Low-Shelf Filter allows you to boost or attenuate frequencies below
300Hz in 0.5dB steps. Use this lter whenever the acoustics of your room
cause problems in the low frequency range.
Bekijk gratis de handleiding van Eve Audio SC3070, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eve Audio |
| Model | SC3070 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2060 MB |
