Handleiding
Je bekijkt pagina 10 van 24
SC3012
SC3010
Volume Mode
10
OPERATION
3.4. Powering on/off: Standby Mode
Press and hold the control three seconds in order to put the monitor in
Standby mode. The volume will decrease gradually while the LED ring
lights up once around the Volume control. Afterwards, the LED on the right
end will remain dimly lit and the power consumption is reduced to 1 watt.
! To exit the Standby mode press briey the Volume control once again. The
level will increase gradually.
3.5. Volume Mode
• Level Adjustment
The maximum input level for balanced (XLR) and unbalanced signals
(RCA) is +7dBu or +22dBu, depending on the position of the Max. Input
switch on the rear panel (see “3.14. DIP Switches” on page 15). Higher
levels produce distortion due to the overloading of the analog to digital
converter.
Given that some professional studio devices can produce in excess of
+22 dBu, the LED ring will start blinking whenever the AD converter is
overloading. If that is the case, the output level of the source should be
reduced.
• Volume Adjustment
1 Step = 2 dB
(1 LED = 4 Steps)
1 Step = 1 dB
(1 LED = 4 steps)
1 Step = 0.5 dB
(1 LED = 4 Steps)
1 Step = 0.5 dB
(1 LED = 4 Steps)
1 Step = 0.5 dB
(1 LED = 2 Steps)
-80 dB
-48 dB
-20 dB
-12 dB
-8 dB
0 dB
Bekijk gratis de handleiding van Eve Audio SC3012, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eve Audio |
| Model | SC3012 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2038 MB |
