Eurom Sani Mirror LED Wi-Fi 400 handleiding
Handleiding
Je bekijkt pagina 25 van 60
Heang
1. Set the ON/OFF switch to the ON position.
2. Push the ON/OFF heating switch
(Figure 21,pos.3) to activate the heater.
3. The display (Figure 21,pos.6) will light up,
showing the ambient temperature.
4.
Press the Plus or Minus buttons
(Figure 21,pos.4 and5) to set the desired
temperature, from 0°C to 37°C. The de
vice starts heating when the set tempera
ture is higher than the ambient tempera
ture.
When the devices is heating, the °C symbol
is flashing. When the device is not heating
the °C symbol lights up constantly.
5. The display will rst show the set temper
ature for 3 seconds, followed by the ambi
ent temperature.
Figure 21.
Open window detecon
When the ambient temperature decreases 5°C or more within 15 minutes, the device will go in
standby mode and the display shows OPE for 30 minutes.
Switch on the open window detecon funcon:
1. Press the on/o buon unl the screen shows "OFF".
2. Hold + buon and on/o buon 3 seconds. OPE lights up on the display for 3 seconds.
Switch o the open window detecon funcon:
1. Press the on/o buon unl the screen shows "OFF".
2. Hold + buon and on/o buon 3 seconds. OPE ashes on the display for 3 seconds.
Light
1. Shortly push the Light buon (Figure 21,pos.2) to acvate the LED light.
2. Push and hold the Light buon (Figure 21,pos.2) to change the LED light level.
3. Change light color:
◦ Press and hold the Light buon (Figure 21,pos.2)
◦ Simultaneously, press and hold the Minus buon
◦ Display shows C1
◦
Choose with the + and - buon:
C1 - 6000K Cool white light
C2 - 3000K Warm white light
25
Bekijk gratis de handleiding van Eurom Sani Mirror LED Wi-Fi 400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eurom |
| Model | Sani Mirror LED Wi-Fi 400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6960 MB |
