Handleiding
Je bekijkt pagina 27 van 60

2. Place the device in the desired locaon
and mark 4 anchoring holes on the
ground.
3. Drill 4 anchoring holes and place
the plugs for the anchoring screws
(Figure 19,pos.3).
4. Secure the anchoring plates with the 4
anchoring screws (Figure 19,pos.1).
Figure 19.
Remote control
1. Remove the cover screw (Figure 20,pos.1)
and remove the cover (Figure 20,pos.3).
2. Remove the baeries (if present).
3. Insert two baeries (AAA1.5V)
(Figure 20,pos.2) as indicated in the
baery compartment. Make sure to insert
the baeries correctly.
4. Place the cover and secure with the screw.
Figure 20.
Operaon
The device has 8 power sengs, ranging from 450 to 2000 Wa.
1. Plug the power cord into an outlet and turn on the main switch. The 8 power indicators
ash red to indicate that the device is in standby mode.
2. Turn the control knob clockwise to increase the power. The power indicators light up to
indicate the selected seng.
3. While the device is in heang mode, press and hold the control knob unl you hear a sound
to turn on the oscillaon mode.
4. Press and hold the control knob again to turn o the oscillaon mode.
5. Turn the control knob counterclockwise unl all 8 power indicators ash red to put the
device in standby mode.
27
Bekijk gratis de handleiding van Eurom Golden 2000 Shadow Tower, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Eurom |
Model | Golden 2000 Shadow Tower |
Categorie | Heater |
Taal | Nederlands |
Grootte | 6436 MB |