Eurolite DMX Move Controller 512 handleiding

Niet gecategoriseerd

Eurolite

40 pagina's

PDF beschikbaar

Handleiding

00081469, Version 1.1

33/40

Adjusting Fade In for the Color

Channels

Fig. 7.6 Adjusting a fade in time

It is possible to adjust a fade in time for

illumination scenes affecting the RGBW color

channels 1-4 and the dimmer channel. When

actuating a sliding control, the corresponding

channel is moved slowly and steadily

to its target value. The controller automatically

creates all necessary intermediate values.

Keep the button FIXTURE pressed and

simultaneously adjust the fade in time with the

pan wheel between 0-30 seconds. When turning

the wheel, the display indicates the selected value

in the lower line, e.g. “Fade 8.5S“ for a fade in

lasting 8.5 seconds.

Deleting Illumination Scenes

Fig. 7.7 Programming mode

Call the programming mode. For this, keep

the REC pressed until the LED above the

button lights.

Press the button SCENE.

• The control LED lights.

Keep the button DEL pressed and select the

scene to be deleted with the number

buttons 1-16.

• The control LEDs of the memory banks

containing data light.

• If necessary, use the button PAGE to switch

between the two channel groups 1-16 (LED

A lights) and 17-32 (LED B lights).

• To confirm the deleting procedure, all LEDs

of the controller flash three times.

After the desired scene has been deleted,

switch off the programming mode. For this,

keep the button REC pressed until the LED

above the button lights.

Program

Manual

Fade 8.5S

Bekijk gratis de handleiding van Eurolite DMX Move Controller 512, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.