Eurolite DMX Move Controller 512 handleiding

Niet gecategoriseerd

Eurolite

40 pagina's

PDF beschikbaar

Handleiding

00081469, Version 1.1

29/40

the control elements. The display indicates

the control element in the upper line, e.g.

“Fader CHANL:1/R “ and the DMX channel in

the lower line, e.g. “DMX channel:01”

Fig. 6.2 Channel assignment

Adjust the first control element with the pan

wheel, e.g. 1/R = sliding control 1 and

assign the DMX channel with the tilt wheel.

Control

DMX

channel

Control

DMX

channel

1/red 1 10 10

2/green 2 11 11

3/blue 3 12 12

4/white 4 13 13

5/dimmer 5 14 14

6 6 15 15

7 7 16 16

8 8 PAN 17

9 9 TILT 18

Tab. 6.2 Assignment of DMX channels to the control elements

Press the button ENTER to memorize your

setting.

• To confirm the memory procedure, all LEDs

of the controller flash three times.

Repeat the steps 5 and 6 to assign further

DMX channels.

Press the button DEL to delete an

assignment (indication „NULL“).

• To confirm the deleting procedure, all LEDs

of the controller flash three times.

After your settings, exit the system settings.

For this, keep the button MENU pressed for

2 seconds.

Inverting Output Values

It is possible to individually invert the output

values of the 512 control channels. The

adjustment can be made in the system settings.

Keep the button MENU pressed for 2

seconds to call the system settings.

The display indicates the first menu item

„01.Patch fixture“ (otherwise select it with the

pan wheel). Press the button ENTER to

begin with the configuration. The display

indicates “PLEASE SELECT FIXTURE”.

Use the number buttons 1-16 to select the

unit of which the DMX channels are to be

inverted (control LED lights).

Select the option FADER REVERSE with the

button SWAP. The display indicates the

control element in the upper line, e.g.

“FADER:1/R “ and the current setting in the

lower line, e.g. “REVERSE:NO“.

Fig. 6.3 Inverting output values

Adjust the first control element with the pan

wheel and use the tilt wheel to select the

setting [YES] if the output value of the control

channel is to be inverted or [NO] if not. With

activated inversion the output value is zero if

the control channel has been set to the

maximum value and vice versa.

Press the button ENTER to memorize your

setting.

• To confirm the memory procedure, all LEDs

of the controller flash three times.

Repeat the steps 5 and 6 to invert further

control channels.

Repeat the steps 3, 5 and 6 to adjust further

units.

After your settings, exit the system settings.

For this, keep the button MENU pressed for

2 seconds.

Assigning the Fade In Function

The fade in function for the RGBW color channels

1-4 and the dimmer channel can be individually

assigned to each device. The adjustment can be

made in the system settings.

Keep the button MENU pressed for 2

seconds to call the system settings.

The display indicates the first menu item

„01.Patch fixture“ (otherwise select it with the

pan wheel). Press the button ENTER to

begin with the configuration. The display

indicates “PLEASE SELECT FIXTURE”.

Use the buttons number buttons 1-16 to

select the unit to be configured (control LED

lights).

Select the option COLOR FADE with the

button SWAP.

Fig. 6.4 Assigning the fade in function

Fader CHANL:1/R

DMX channel:01

FADER:1/R

REVERSE:YES

COLOR FADE

FIXTURE:01 [NO]

Bekijk gratis de handleiding van Eurolite DMX Move Controller 512, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.