Euro Appliances ECT90ICB2 handleiding
Handleiding
Je bekijkt pagina 9 van 16
BUILDING
-
IN THE HOB
• Check tha
t the kitchen unit and the opening conform to the requirements in respect of measurements and ventilation.
•
Remo
ve any wood shavings after the cutting work in the worktop opening and treat the cut edges of plastic or wooden
worktops with sealing varnish if necessary to prevent the worktop from swelling due to moisture.
•
L
ay the hob upside down on the worktop.
•
Moun
t the plug to the connecting cable in accordance with the imposed requirements.
•
Moun
t the supplied fastening brackets using the supplied screws in the induction hob.
•
T
urn the hob over and lay it in the opening.
•
Adjust the br
acket position to suit for different table top thickness.
W
arning: Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop after installation
(see picture).
•
C
onnect the hob to the mains supply. The hob is now ready for use.
•
Check the oper
ation. If the induction hob is connected incorrectly, it will give a sound signal or show an error code
onthedisplays.
REMOVING THE HOB
Disconnect the appliance from the power supply. Remove the induction hob by applying pressure from below. Attention!
Take care not to damage the appliance! Do not try to remove the induction hob by trying to lift it out of the worktop
fromabove.
hob
work t
op
fastening bracket
f
astening bracket
26 • English
IKI9035-instructions.indd 26IKI9035-instructions.indd 26 17-1-2020 15:18:4417-1-2020 15:18:44
Bekijk gratis de handleiding van Euro Appliances ECT90ICB2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Euro Appliances |
| Model | ECT90ICB2 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 2471 MB |
