Euro Appliances ECT600ACG handleiding
Handleiding
Je bekijkt pagina 9 van 21
9
The cable can be looped if necessary, but make sure that is not kinked or trapped
when the hob is in position. Care must be taken to avoid the cable being in contact
with hot parts of the appliance.
Replacing the mains supply cable
If the mains supply cable is damaged, then it must be replaced by an appropriate
replacement.
The mains supply cable should be replaced in accordance with the following
instructions:
Switch the appliance off at the control switch.
O
p
e
n
t
h
e
terminal block on the underside of the hob.
Unscrew the terminal screws fixing the cable.
The “green-yellow” earth wire must be connected to the terminal marked . It
must be about 10 mm longer than the live and neutral wires.
The “blue” neutral wire must be connected to the terminal marked with letter (N)
- the live wire(L1) must be connected to the terminal marked with letter (L1)
(220-240V 1N～).
The “blue” neutral wire must be connected to the terminal marked with letter (N)
- the live wire L1 must be connected to the terminal marked with letter (L1),. the
live wire L2 must be connected to the terminal marked with letter (L2) (380-
420V 2N～).
Bekijk gratis de handleiding van Euro Appliances ECT600ACG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Euro Appliances |
| Model | ECT600ACG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4213 MB |
