Euro Appliances ECI30FZ3 handleiding
Handleiding
Je bekijkt pagina 11 van 28
11
The cooking zones are, up to a limit, automatically adapted to the diameter of the pan. However the
bottom of this pan must have a minimum of diameter according to the corresponding cooking zone. To
obtain the best efficiency of your hob, please place the pan in the centre of the cooking zone.
3.3 How to use
3.3.1 Start cooking
Touch the ON/OFF control for one second.
After power on, the
buzzer beeps once, all displays show “–” or “– –”, indicating
that the induction hob has entered the state of standby mode.
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Touching the heating zone selection control ,and the indicator
next to the key will flash
Select a heat setting by touching the “-” or “+” control.
• If you don’t choose a heat setting within 1 minute, the
Induction hob will automatically switch off. You will need to
start again at step 1.
• You can modify the heat setting at any time during
cooking.
If the display flashes alternately with the heat setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
Cooking zone
The base diameter of induction cookware
Minimum (mm)
Maximum (mm)
160mm
120
160
180mm
140
180
Bekijk gratis de handleiding van Euro Appliances ECI30FZ3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Euro Appliances |
| Model | ECI30FZ3 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4194 MB |
