Eureka J15 ULTRA handleiding
Handleiding
Je bekijkt pagina 17 van 36
PRE PARATIONS BEFORE USE
NOTES
1. If you manually put the robotic Vacuum into the base station,
ensure that the side with the charging contacts is placed inside.
2. Before the first cleaning, ensure that the robot is fully charged.
Tips
Before first use, manually put the robot in the base station, and
the robot will automatically turn on.
After power-on, the robot will automatically pair with the base
station. If the white status indicator of base station flashes fast, it
means that the base station is disconnected from the robot. See
the solution for "the base station indi
cator flashes white rapidly"
in Troubleshooting.
Installation of the Mop
01
02
As shown in the figure, align the mop pad centrally
with the mop pad plate and apply it evenly.
Press and hold the " " button of robot for three seconds to turn
it on. Wait for the power indicator to remain on, and place the
robot against the base station as shown in the figure for
charging. To facilitate daily use, please keep the robot charged.
Power on & Charging
Press the mop into the robot to complete the
installation.
Mop Pad
16
Bekijk gratis de handleiding van Eureka J15 ULTRA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eureka |
| Model | J15 ULTRA |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 2561 MB |
