Eureka J15 ULTRA handleiding
Handleiding
Je bekijkt pagina 10 van 36
09
This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an
equipment grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified
electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided
with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This appliance is for use on a nominal 120-V circuit and has a grounding attachment plug that looks like the plug illustrated as
below. Make sure that the appliance is connected to an outlet having the same configuration as the plug. No adaptor should be
used with this appliance.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
WARNING:
FCC Compliance Statement
GROUNDING INSTRUCTIONS
CLASS 1 LASER PRODUCT
INVISIBLE LASER RADIATION
This device complies with DHHS Radiation Rules, 21CFR Chapter 1, SubchapterJ.
1. To enable Power Saving Mode: In standby or charging state, press and hold the docking button and the LiDAR sensor
for 20s. All the indicator lights will turn o.
2. To disable Power Saving Mode: press and hold the power button to restart the machine.
Bekijk gratis de handleiding van Eureka J15 ULTRA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eureka |
| Model | J15 ULTRA |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 2561 MB |
