Handleiding
Je bekijkt pagina 78 van 84
EN 18
Symptom Possible cause Solution
Symbol Lo appears in the
displays.
Lock function is activated. Deactivate the lock function.
The controls react badly. There may be a thin layer
of water on the hob or on a
finger that makes the controls
unresponsive.
Make sure the hob and/or
finger is clean.
Error code Problem Solution
E1 Temperature sensor failure - open
circuit.
Contact the service department.E2 Temperature sensor failure - short
circuit.
E7 Temperature sensor failure.
C1 High temperature of the hob’s sensor. Allow the appliance to cool down.
Then switch the hob on again.
E3 Temperature sensor failure.
Contact the service department.
E4 Temperature sensor failure.
C2 An internal temperature that is too high. Allow the appliance to cool down.
Then switch on the hob again.
EL Supply voltage is below the rated
voltage.
Please inspect whether power supply
is normal.
EH Supply voltage is above the rated
voltage.
EU Communication error in the hob. Reset the device by briefly
disconnecting the electrical
connection. If this does not
help, please contact the service
department.
EF Multiple keys are operated
simultaneously for a longer period of
time. There’s something on the control
panel.
Make sure the control panel is clean.
TROUBLESHOOTING
Bekijk gratis de handleiding van Etna KIV364RVS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Etna |
| Model | KIV364RVS |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5443 MB |
