Etna KIF5580ZT handleiding

84 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 72 van 84
EN 12
Finish cooking
1. Set the power level to ‘0’ by touching the slide control to switch off the cooking zone.
After a few seconds the display will show ‘--’.
2. Switch off the induction hob by touching the on/off key until you hear an audio signal.
Symbol H will appear in the display of the cooking zone which is too hot to touch.
The symbol disappears when the surface has cooled down to a safe temperature.
It can also be used as an energy saving function; if you want to heat other pans,
use the cooking zone that is still hot.
If all cooking zones are set to ‘--’ and no further operation is performed, the hob will
switch off automatically after 1 minute.
Pan detection symbol
When the pan detection symbol is blinking on the display:
you have not placed a pan on the correct cooking zone;
the pan you’re using is not suitable for induction cooking;
the pan is too small or not properly centred on the cooking zone.
The cooking zone does not work until a suitable pan is placed on the cooking zone.
Connecting flex induction cooking zones
The flex induction cooking zones can be connected to each other. This creates one large zone
that can be used, for example, a grill plate or a large fish pan on the same power. The pan has to
be large enough to cover the centres of the front and rear cooking zone (> 210 mm). If the pan is
too small, the connecting function is switched off within 10 seconds.
Connecting flex induction cooking zones
1. Place a pan in the middle of both flex induction cooking zones.
2. Touch the on/off key for about 1 second until you hear an audio signal.
3. Touch the connected cooking zones selection key.
The ‘connected cooking zone’ symbol appears in the display of the upper cooking zone.
In the display of the lower cooking zone, ‘15’ appears with the ‘selected cooking zone’
indicator.
OPERATION

Bekijk gratis de handleiding van Etna KIF5580ZT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkEtna
ModelKIF5580ZT
CategorieFornuis
TaalNederlands
Grootte5580 MB