Handleiding
Je bekijkt pagina 71 van 84
EN 11
EN
Please read the chapter ‘Before first use’ very carefully before you start cooking.
This prevents incorrect use of the hob.
Switching on and power setting
Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
1. Place a pan in the middle of a cooking zone.
2. Touch the on/off key until you hear an audio signal.
▷ On all displays ‘--’ appears.
3. Use the slide control of the relevant cooking zone to set the desired setting.
▷ The power level and ‘selected cooking zone’ indicator appear in the display.
▷ The cooking zone starts automatically at the level that has been set.
▷ Set a higher or lower power using the slide control.
Select the cooking zone by touching the slide control; the ‘selected cooking zone’
indicator appears. As long as this indicator is visible, the cooking zone is selected. The
power level can be adjusted or a timer can be connected to it.
The hob switches off if no setting is made or a function is selected within 1 minute.
Boost function
You can use the boost function to cook for max. 10 minutes at the highest cooking level.
1. Touch the boost key to select the boost function.
▷ ‘P’ appears on the display.
▷ After 10 minutes the power is reduced to the original setting. If the original setting
equals 0, the power is reduced to setting 15.
Touch the slide control and set the power level to ‘0’ to stop the boost function
prematurely.
You can also touch the boost button again to stop the boost function prematurely.
The power is then reduced to setting 15.
OPERATION
Bekijk gratis de handleiding van Etna KIF5580ZT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Etna |
| Model | KIF5580ZT |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5580 MB |
